内容へ移動
[[
✎ os:oi:lagg:start
]]
doku@ainoniwa
文書の表示
最近の変更
サイトマップ
ログイン
この文書は読取専用です。文書のソースを閲覧することは可能ですが、変更はできません。もし変更したい場合は管理者に連絡してください。
====== Link Aggregation ====== LAG(Link AGgreration)の設定について記述する。 ここでは特に、LACPを使用することを前提に設定する。 ===== 構成 ===== ^OpenIndiana^ ^Procurve 1810G-24^ | e1000g0| - |Port 10| | e1000g1| - |Port 12| * Procurve側の設定は既に完了しているものとする。 ===== 設定 ===== <code># dladm create-aggr -d e1000g0 -d e1000g1 # dladm modify-aggr -L active aggr1</code> * 恐らくaggr1生成時点では、LACPはoffになっているので、モードをLACP Activeにする。 * インタフェース作成後は、普段同様に[[..:ip:|IPの設定]]を行う。 ===== 確認 ===== <code>root@yuyuko:~# dladm show-aggr -x LINK PORT SPEED DUPLEX STATE ADDRESS PORTSTATE aggr1 -- 1000Mb full up 0:19:99:ae:64:39 -- e1000g1 1000Mb full up 0:19:99:ae:64:39 attached e1000g0 1000Mb full up 0:19:99:b2:b0:4f attached root@yuyuko:~# dladm show-aggr -P LINK POLICY ADDRPOLICY LACPACTIVITY LACPTIMER FLAGS aggr1 L4 auto active short ----- root@yuyuko:~# dladm show-aggr -L LINK PORT AGGREGATABLE SYNC COLL DIST DEFAULTED EXPIRED aggr1 e1000g1 yes yes yes yes no no -- e1000g0 yes yes yes yes no no</code>
文書の表示
以前のリビジョン
メディアマネージャー
文書の先頭へ