差分

この文書の現在のバージョンと選択したバージョンの差分を表示します。

この比較画面にリンクする

両方とも前のリビジョン 前のリビジョン
次のリビジョン
前のリビジョン
device:nic:expi9402pt:start [2011/03/17 01:10]
yuki
device:nic:expi9402pt:start [2021/05/18 22:06]
yuki 削除
ライン 8: ライン 8:
     * http://​support.ap.dell.com/​support/​edocs/​network/​intelpro/​r166298/​ja/​iscsi/​dos_util.htm     * http://​support.ap.dell.com/​support/​edocs/​network/​intelpro/​r166298/​ja/​iscsi/​dos_util.htm
     * http://​www.etherboot.org/​wiki/​sanboot/​iscsi_boot     * http://​www.etherboot.org/​wiki/​sanboot/​iscsi_boot
- 
-<note important>​IntelのBootROM(12.4) + DH57JG + EXPI9402PTの組み合わせだと、BootROMの起動確認が取れず。動作確認が取れたのはDELLの2.0.7/​2.0.8だけだった。 
-</​note>​ 
  
   - iSCSI Boot ROMの書き換えユーティリティのDL   - iSCSI Boot ROMの書き換えユーティリティのDL
ライン 35: ライン 32:
   }</​code>​   }</​code>​
 <note important>​ <note important>​
-LUN番号は十六進表記お前ちゃん説明しとけ!」ってお姉ちゃんが言ってた\\ +  * LUN番号の部分は十六進表記。LUN10なら、"​a"​記述する。 
-例)LUNが13時 : \\ +  ​* ​LUNが0以外場合に、Kernel Panicになる場合がある(Scientific Linux 6.0等で)。起動ディスクのLUNは0にするのが無難。
-  option root-path "​iscsi:​192.168.1.31:::​c:​iqn.2010-01.net.ainoniwa.istgt:​misaka-nw-02";​+
 </​note>​ </​note>​
     * iSCSI HBAとして動作している場合は、BIOS画面に入る前に動作が始まって、iSCSI TargetとなるDiskがBIOSから見える。     * iSCSI HBAとして動作している場合は、BIOS画面に入る前に動作が始まって、iSCSI TargetとなるDiskがBIOSから見える。
CC Attribution-Noncommercial-Share Alike 4.0 International
Driven by DokuWiki Recent changes RSS feed Valid CSS Valid XHTML 1.0