差分
この文書の現在のバージョンと選択したバージョンの差分を表示します。
os:freebsd:smartctl:start [2010/09/08 01:04] yuki |
os:freebsd:smartctl:start [2011/08/24 10:07] |
||
---|---|---|---|
ライン 1: | ライン 1: | ||
- | ====== smartmontools ====== | ||
- | S.M.A.R.T情報を取得するときに使うツール。 | ||
- | <code> | ||
- | # cd /usr/ports/sysutils/smartmontools | ||
- | # make install clean | ||
- | # rehash | ||
- | </code> | ||
- | |||
- | |||
- | |||
- | とりあえず情報全部出すときは -a 付けてデバイスを指定する。 | ||
- | |||
- | <code># smartctl -a /dev/ad6 | ||
- | smartctl 5.39.1 2010-01-28 r3054 [FreeBSD 8.0-RELEASE-p4 amd64] (local build) | ||
- | Copyright (C) 2002-10 by Bruce Allen, http://smartmontools.sourceforge.net | ||
- | |||
- | === START OF INFORMATION SECTION === | ||
- | Model Family: Hitachi Deskstar 7K2000 | ||
- | Device Model: Hitachi HDS722020ALA330 | ||
- | Serial Number: JK1170YAH3NR3P | ||
- | Firmware Version: JKAOA28A | ||
- | User Capacity: 2,000,398,934,016 bytes | ||
- | Device is: In smartctl database [for details use: -P show] | ||
- | ATA Version is: 8 | ||
- | ATA Standard is: ATA-8-ACS revision 4 | ||
- | Local Time is: Wed Sep 8 01:02:56 2010 JST | ||
- | SMART support is: Available - device has SMART capability. | ||
- | SMART support is: Enabled | ||
- | |||
- | === START OF READ SMART DATA SECTION === | ||
- | SMART overall-health self-assessment test result: PASSED | ||
- | |||
- | General SMART Values: | ||
- | Offline data collection status: (0x84) Offline data collection activity | ||
- | was suspended by an interrupting command from host. | ||
- | Auto Offline Data Collection: Enabled. | ||
- | Self-test execution status: ( 0) The previous self-test routine completed | ||
- | without error or no self-test has ever | ||
- | been run. | ||
- | Total time to complete Offline | ||
- | data collection: (23065) seconds. | ||
- | Offline data collection | ||
- | capabilities: (0x5b) SMART execute Offline immediate. | ||
- | Auto Offline data collection on/off support. | ||
- | Suspend Offline collection upon new | ||
- | command. | ||
- | Offline surface scan supported. | ||
- | Self-test supported. | ||
- | No Conveyance Self-test supported. | ||
- | Selective Self-test supported. | ||
- | SMART capabilities: (0x0003) Saves SMART data before entering | ||
- | power-saving mode. | ||
- | Supports SMART auto save timer. | ||
- | Error logging capability: (0x01) Error logging supported. | ||
- | General Purpose Logging supported. | ||
- | Short self-test routine | ||
- | recommended polling time: ( 1) minutes. | ||
- | Extended self-test routine | ||
- | recommended polling time: ( 255) minutes. | ||
- | SCT capabilities: (0x003d) SCT Status supported. | ||
- | SCT Feature Control supported. | ||
- | SCT Data Table supported. | ||
- | |||
- | SMART Attributes Data Structure revision number: 16 | ||
- | Vendor Specific SMART Attributes with Thresholds: | ||
- | ID# ATTRIBUTE_NAME FLAG VALUE WORST THRESH TYPE UPDATED WHEN_FAILED RAW_VALUE | ||
- | 1 Raw_Read_Error_Rate 0x000b 100 100 016 Pre-fail Always - 0 | ||
- | 2 Throughput_Performance 0x0005 131 131 054 Pre-fail Offline - 108 | ||
- | 3 Spin_Up_Time 0x0007 117 117 024 Pre-fail Always - 615 (Average 617) | ||
- | 4 Start_Stop_Count 0x0012 100 100 000 Old_age Always - 51 | ||
- | 5 Reallocated_Sector_Ct 0x0033 100 100 005 Pre-fail Always - 0 | ||
- | 7 Seek_Error_Rate 0x000b 100 100 067 Pre-fail Always - 0 | ||
- | 8 Seek_Time_Performance 0x0005 112 112 020 Pre-fail Offline - 39 | ||
- | 9 Power_On_Hours 0x0012 100 100 000 Old_age Always - 4593 | ||
- | 10 Spin_Retry_Count 0x0013 100 100 060 Pre-fail Always - 0 | ||
- | 12 Power_Cycle_Count 0x0032 100 100 000 Old_age Always - 51 | ||
- | 192 Power-Off_Retract_Count 0x0032 100 100 000 Old_age Always - 93 | ||
- | 193 Load_Cycle_Count 0x0012 100 100 000 Old_age Always - 93 | ||
- | 194 Temperature_Celsius 0x0002 142 142 000 Old_age Always - 42 (Lifetime Min/Max 19/50) | ||
- | 196 Reallocated_Event_Count 0x0032 100 100 000 Old_age Always - 0 | ||
- | 197 Current_Pending_Sector 0x0022 100 100 000 Old_age Always - 0 | ||
- | 198 Offline_Uncorrectable 0x0008 100 100 000 Old_age Offline - 0 | ||
- | 199 UDMA_CRC_Error_Count 0x000a 200 200 000 Old_age Always - 0 | ||
- | |||
- | SMART Error Log Version: 0 | ||
- | No Errors Logged | ||
- | |||
- | SMART Self-test log structure revision number 1 | ||
- | No self-tests have been logged. [To run self-tests, use: smartctl -t] | ||
- | |||
- | |||
- | SMART Selective self-test log data structure revision number 1 | ||
- | SPAN MIN_LBA MAX_LBA CURRENT_TEST_STATUS | ||
- | 1 0 0 Not_testing | ||
- | 2 0 0 Not_testing | ||
- | 3 0 0 Not_testing | ||
- | 4 0 0 Not_testing | ||
- | 5 0 0 Not_testing | ||
- | Selective self-test flags (0x0): | ||
- | After scanning selected spans, do NOT read-scan remainder of disk. | ||
- | If Selective self-test is pending on power-up, resume after 0 minute delay. | ||
- | </code> | ||
- | |||
- | * |