**以前のリビジョンの文書です**
FreeBSDとLACPを組む
FreeBSD : 8.1-RELEASE
Procurve 1810-24G : HP ProCurve 1810G - 24 GE, P.1.17, eCos-2.0
Procurve 1810-24G : HP ProCurve 1810G - 24 GE, P.1.17, eCos-2.0
- Procurve側の設定
- Trunks → Trunk Configuration
- Createにチェック、Trunk Nameを指定してApply
- Trunks → Trunk Membership
- 必要なポートのボックスをM（member指定）マークとL（LACP使用）マークにしてApply
- Procurve側の出力
- Status → Trunk
- Status → Port Summary
- FreeBSD側の設定（rc.confより抜粋）<code> clonedinterfaces=“lagg0” ifconfiglagg0=“create” ifconfigem0=“UP” ifconfigre0=“UP” ifconfig_lagg0=“laggproto lacp laggport em0 laggport re0 192.168.1.31 netmask 255.255.255.0” </code>
- FreeBSD側の出力<code> $ ifconfig lagg0 lagg0: flags=8843<UP,BROADCAST,RUNNING,SIMPLEX,MULTICAST> metric 0 mtu 1500 options=209b<RXCSUM,TXCSUM,VLANMTU,VLANHWTAGGING,VLANHWCSUM,WOLMAGIC> ether 00:1b:21:4f:71:3b inet 192.168.1.31 netmask 0xffffff00 broadcast 192.168.1.255 inet6 fe80::21b:21ff:fe4f:613b%lagg0 prefixlen 64 scopeid 0x7 inet6 2001:380:e08:f7::38 prefixlen 64 inet6 2001:380:e08:f7:21b:21ff:fe4f:713b prefixlen 64 autoconf nd6 options=3<PERFORMNUD,ACCEPT_RTADV> media: Ethernet autoselect status: active laggproto lacp laggport: re0 flags=1c<ACTIVE,COLLECTING,DISTRIBUTING> laggport: em0 flags=1c<ACTIVE,COLLECTING,DISTRIBUTING> </code>
